Accessories

Recommended for use with 300 lb. Type IA and 375 lb. Type IAA extension ladders (OSHA and ANSI allow use with 250 lb. Type I extension ladders also).
User installed only.

• Lightweight, sturdy, easy to use
• Designed for quick field adjustments
• Mounts on either side of extension ladder

Shipping quantity (2) per pkg.; (1) pkg. per carton

AC10-14-02	2-Rung Model	Short Body	Accepts stages to 14" width	15.0 lbs. approx. shipping wt.
AC10-20-02	2-Rung Model	Long Body	Accepts stages to 20" width	18.0 lbs. approx. shipping wt.
AC10-20-03	3-Rung Model	Long Body	Accepts stages to 20" width	20.0 lbs. approx. shipping wt.

LeveLok® Ladder Leveler with 2 base attachments. Base unit stays attached to the ladder while leveler can be easily removed when not in use. Swivel shoe with ice pick on both ends. Leveler can be used on either side of ladder. Provides 8-1/2" of adjustment. (LeveLok® is a registered trademark of the LeveLok® Corporation.)

User or factory installed.
Approx. Shipping Wt.: 8.5 lbs.
Fits on Series: 6102, 6092, 6062, 6052, 6101, 6091, 6081

Easily attaches to Green Bull fiberglass and aluminum extension ladders to level ladder on uneven surfaces. Automatically adjusts up to 8-1/2". Levels and locks securely in place. The width of the ladder is increased by approximately 3-3/4". The duty rating of the ladder will remain the same after proper installation of leveler. Two (2) levelers (one for each rail) are included with mounting hardware and instructions. Shipping quantity (1) per carton

NOTE: The original shoes of a Werner D1500 series ladder may replace the steel shoes on a model PK80-2.

User or factory installed.
Approx. Shipping Wt.: 9.5 lbs. Approx. Added Wt. when Factory Installed: 6.5 lbs.
Fits on Series: 6102, 6092, 6062, 6052, 6101, 6091, 6081

Helps prevent damage to support surfaces. Especially designed to "snap" over extension ladder rail end caps. Resists paint, stains, thinners and solvents. Shipping quantity (1) pair of covers per pkg.; (6) pkg. per carton.

User installed only.
Approx. Shipping Wt.: 1.2 lbs. each
Fits on Series: 6102, 6092, 6062, 6052, 6101, 6091, 6081

Span: 47" Standoff: 10"
For use on aluminum ladders of all duty ratings. Attaches in minutes. Mar-resistant rubber caps protect work surface. Paint can hook included. Comes with mounting hardware and instructions. Shipping quantity (1) per pkg.; (6) pkg. per carton.

User installed only.
Approx. Shipping Wt.: 4.5 lbs.
Fits on Series: 6101, 6091, 6081

Functions as both cable hook and v-rung. For use in applications where the diameter of the pole at the point of support does not exceed 10". Steel v-rung has rubber pad for slip-resistant performance. Shipping quantity (1) cable hook and v-rung assembly, mounting hardware and instructions.

Kit Numbers: 92-88, 92-89, 92-91, A92

User or factory installed.
Approx. Shipping Wt.: 4.0 lbs. Approx. Added Wt. when Factory Installed: 3.0 lbs.
Fits on Series: 6102, 6092, 6062, 6052

Slip-resistant rubber grip attached to steel v-rung for wood, metal or concrete poles. Pre-pierced holes in fiberglass top rails are provided to accept this accessory. V-rung assembly comes with mounting hardware and instructions.

Kit Numbers: 71-1, 71-3, 71-4, A71

User or factory installed.
Approx. Shipping Wt.: 71-1, 71-3:1.5 lbs. 71-4: 2.0 lbs.
Approx. Added Wt. when Factory Installed: 1.4 lbs.
Fits on Series: 6102, 6092, 6062, 6052

Span adjustment: 49", 57" or 65" Standoff distance: 12" or 29-1/2" Rectangular stabilizer spans double windows. Quickly converts standoff distance for larger overhangs. Mounts quickly and easily. Shipping quantity (1) stabilizer, rubber pads, fleece bonnets, mounting hardware and instructions. Fits rail up to 3" x 1-3/16"

User installed only.
Approx. Shipping Wt.: 9.5 lbs.
Fits on Series: 6101, 6091, 6081