United States [Change]

Accessories

NOTE: Listed below are the most common compatible Werner accessories. Additional Werner accessories are available. Please contact customer service at 888-523-3372 for more information.

AC10-14-02, AC10-20-02, AC10-20-03 Ladder Jacks

acc-ac10-14-02
Recommended for use with 300 lb. Type IA and 375 lb. Type IAA extension ladders (OSHA and ANSI allow use with 250 lb. Type I extension ladders also).
User installed only.
  • Lightweight, sturdy, easy to use
  • Designed for quick field adjustments
  • Mounts on either side of extension ladder

Shipping quantity (2) per pkg.; (1) pkg. per carton

AC10-14-02 2-Rung Model Short Body Accepts stages to 14" width 15.0 lbs. approx. shipping wt.
AC10-20-02 2-Rung Model Long Body Accepts stages to 20" width 18.0 lbs. approx. shipping wt.
AC10-20-03 3-Rung Model Long Body Accepts stages to 20" width 20.0 lbs. approx. shipping wt.

PK70-1/APK70 Leveler

acc-pk70-1-apk70

LeveLok® Ladder Leveler with 2 base attachments. Base unit stays attached to the ladder while leveler can be easily removed when not in use. Swivel shoe with ice pick on both ends. Leveler can be used on either side of ladder. Provides 8-1/2" of adjustment. (LeveLok® is a registered trademark of the LeveLok® Corporation.)

User or factory installed.
Approx. Shipping Wt.: 8.5 lbs.
Fits on Series: 6102, 6092, 6062, 6052, 6101, 6091, 6081

PK80-2/APK80 Level-Master® Automatic Ladder Levelers

acc-pk80-2-apk80

Easily attaches to Green Bull fiberglass and aluminum extension ladders to level ladder on uneven surfaces. Automatically adjusts up to 8-1/2". Levels and locks securely in place. The width of the ladder is increased by approximately 3-3/4". The duty rating of the ladder will remain the same after proper installation of leveler. Two (2) levelers (one for each rail) are included with mounting hardware and instructions. Shipping quantity (1) per carton

NOTE: The original shoes of a Werner D1500 series ladder may replace the steel shoes on a model PK80-2.

User or factory installed.
Approx. Shipping Wt.: 9.5 lbs. Approx. Added Wt. when Factory Installed: 6.5 lbs.
Fits on Series: 6102, 6092, 6062, 6052, 6101, 6091, 6081

AC19-2 Extension Ladder Covers

acc-ac19-2

Helps prevent damage to support surfaces. Especially designed to "snap" over extension ladder rail end caps. Resists paint, stains, thinners and solvents. Shipping quantity (1) pair of covers per pkg.; (6) pkg. per carton.

User installed only.
Approx. Shipping Wt.: 1.2 lbs. each
Fits on Series: 6102, 6092, 6062, 6052, 6101, 6091, 6081

AC96 Aluminum Stabilizer

acc-ac96

Span: 47" Standoff: 10"
For use on aluminum ladders of all duty ratings. Attaches in minutes. Mar-resistant rubber caps protect work surface. Paint can hook included. Comes with mounting hardware and instructions. Shipping quantity (1) per pkg.; (6) pkg. per carton.

User installed only.
Approx. Shipping Wt.: 4.5 lbs.
Fits on Series: 6101, 6091, 6081

92/A92 Cable Hook and V-Rung Assembly

acc-92-a92

Functions as both cable hook and v-rung. For use in applications where the diameter of the pole at the point of support does not exceed 10". Steel v-rung has rubber pad for slip-resistant performance. Shipping quantity (1) cable hook and v-rung assembly, mounting hardware and instructions.

Kit Numbers: 92-88, 92-89, 92-91, A92

User or factory installed.
Approx. Shipping Wt.: 4.0 lbs. Approx. Added Wt. when Factory Installed: 3.0 lbs.
Fits on Series: 6102, 6092, 6062, 6052

71/A71 Padded Fixed V-Rung

acc-71-a71

Slip-resistant rubber grip attached to steel v-rung for wood, metal or concrete poles. Pre-pierced holes in fiberglass top rails are provided to accept this accessory. V-rung assembly comes with mounting hardware and instructions.

Kit Numbers: 71-1, 71-3, 71-4, A71

User or factory installed.
Approx. Shipping Wt.: 71-1, 71-3:1.5 lbs. 71-4: 2.0 lbs.
Approx. Added Wt. when Factory Installed: 1.4 lbs.
Fits on Series: 6102, 6092, 6062, 6052

97P Adjustable True Grip® Stabilizer and Surface Protectors

acc-97p

Span adjustment: 49", 57" or 65" Standoff distance: 12" or 29-1/2" Rectangular stabilizer spans double windows. Quickly converts standoff distance for larger overhangs. Mounts quickly and easily. Shipping quantity (1) stabilizer, rubber pads, fleece bonnets, mounting hardware and instructions. Fits rail up to 3" x 1-3/16"

User installed only.
Approx. Shipping Wt.: 9.5 lbs.
Fits on Series: 6101, 6091, 6081